Water Tanks
Water tanks store water for a range of purposes, including drinking water, stormwater management, farming and bushfire fighting.
Before you install a tank
Water tanks with a capacity greater than 5,000 litres require building approval before installation.
Speak with our Planning Team before finalising your proposal to check whether development approval is also required.
Tank requirements and location
- Water supply: if a new property is not connected to scheme water or a potable bore supply, a rainwater tank with a minimum capacity of 120,000 litres is required to collect rainwater.
- Bushfire fittings: these tanks must have fittings that enable first responders to access water for bushfire fighting.
- Residential lots: tanks must be located behind the dwelling and must not be visible from the primary street.
- Building envelopes: tanks proposed outside a building envelope require development approval before a building permit can be issued.
Building application checklist
Include the following with your building application.
Application form and fees
Site plan
Provide a site plan at a minimum scale of 1:200. For lots larger than 1,000 square metres, a scale of 1:500 may be suitable.
The plan must show setbacks from lot boundaries and all other buildings on the property.
Elevations and construction details
- Elevations at a minimum scale of 1:100, showing the height and shape of the proposed tank.
- Construction details signed by a suitably qualified structural engineer.
- Details of the materials the tank will be built from.
Will other approvals be required?
Planning requirements may affect the location and design of your tank. Speak with our Planning Team before finalising and submitting your building application.
Checking these requirements early will help make the approval process smoother and avoid unnecessary delays.
This information is a guide only. The checklist is not exhaustive, and further information may be requested following assessment and before building approval is granted.