Retaining Walls

A retaining wall is a wall or structure designed and constructed to support soil at a slope steeper than can naturally be supported.

While retaining walls primarily support soil, they may also be subject to loads from buildings, footings, vehicles, driveways, water and wind acting on dividing fences.

Before constructing a retaining wall, you may need to obtain a building permit and planning approval.

Before you start

  • A fence must not be used to retain soil unless it is designed to do so.
  • Retaining walls must be constructed entirely within one property. They must not straddle the boundary.
  • Check building and planning approval requirements before commencing work.

Who is responsible for a retaining wall?

The natural ground level at the boundary of a lot must be maintained.

If a person excavates below or fills above the natural ground level, that person has an obligation to provide a suitable retaining wall or durable embankment. This must maintain the natural ground level and any existing surcharge load at the boundary.

In some instances, adjoining owners sharing a common boundary may need to contribute proportionately to the construction of retaining walls or durable embankments.

When is a building permit required?

All retaining walls greater than 500mm in height require a building permit before work commences.

Retaining walls less than 500mm high also require a permit where they:

  • Encroach beyond the boundary of the land where the work is carried out.
  • Adversely affect adjoining lots by reducing the bearing capacity of the land.
  • Damage or reduce the structural adequacy of a building or structure on the land.
  • Change natural site drainage in a way that reduces drainage effectiveness for the land or existing or future buildings.
  • Support another structure, such as a wall, fence, swimming pool or building.

Building application checklist

Include the following with your building permit application.

Application form and fees

Site plan

Provide a site plan at a minimum scale of 1:200, showing:

  • Setbacks from lot boundaries and all other buildings on the property.
  • Dimensions of the proposed structure.
  • The top and bottom levels of the retaining wall in relation to natural ground levels.
  • Distances from effluent tanks, leach drains and related systems, where applicable.

Engineering details and drawings

  • Engineering details signed by a structural engineer.
  • Section drawings.
  • Elevations.

This checklist is not exhaustive. Further information may be requested during assessment.

For more information about the building approvals process, read the Building Approvals Process Guide (PDF).

When is planning approval required?

Planning approval is required:

  • Where a retaining wall exceeds 500mm in height above natural ground level and does not meet the required side and rear setbacks under the Residential Design Codes (Variation 1).
  • Where a retaining wall exceeds 500mm in height above natural ground level and is within the front setback.

To confirm whether your proposal requires planning or development approval, contact Planning Services on (08) 9526 1111 to discuss your specific requirements.

View planning information and application forms

Contact Building Services

For further information, call (08) 9526 1111 or email info@sjshire.wa.gov.au.