Water Safety and Quality
Safe water is important for drinking, preparing food and recreation. Find out how we monitor local water quality and how to manage a private drinking water supply.
Recreational water
Our Environmental Health team conducts microbiological testing at public aquatic facilities and Serpentine Falls to monitor water quality.
Always follow signs and advice at the location, including any warnings about water quality or restrictions on swimming.
Drinking water
Our Environmental Health team regularly samples non-scheme drinking water at premises where food is prepared and sold, and where rainwater or bore water is supplied to the public for drinking.
If your property is not connected to scheme water, you are responsible for managing your own drinking water supply.
Check that your water is safe
Water can contain harmful microorganisms or chemicals even when it looks clear.
The Department of Health recommends that water from private sources is professionally tested and treated before it is used for drinking or food preparation.
Read about drinking water testing and participating laboratories
Managing your water source
Bore water
Bore water quality and availability vary across the Shire. It may contain contaminants that affect health, damage plumbing or stain surfaces and laundry.
Have bore water tested before using it for drinking or other household purposes. The results will help determine whether treatment is needed and which treatment is suitable.
If bore water is your drinking water supply, HealthyWA recommends testing it at least annually for chemical and microbiological contamination through a National Association of Testing Authorities (NATA) accredited laboratory.
Read HealthyWA’s advice on bore water.
Rainwater
Rainwater can become contaminated by leaves, bird droppings, dead animals and other material entering the collection or storage system.
To help protect your supply:
- Keep roofs and gutters clean and in good repair.
- Use a leaf trap and screen tank inlets and overflows to keep out insects and animals.
- Keep the tank covered and access hatches securely fitted.
- Divert the first runoff after a dry period away from the tank.
- Inspect the tank every two to three years for sediment build-up.
Consider using a professional tank cleaning service when cleaning is needed. The inside of a tank is a confined space and can be dangerous to enter.
Routine disinfection is not normally necessary. If contamination is suspected, seek advice and follow the Department of Health’s guidance on cleaning and disinfection.
Read HealthyWA’s guidance on water tanks.
Dam and creek water
Untreated dam and creek water may contain harmful microorganisms and other contaminants. Do not assume it is safe to drink.
If you intend to use this water for drinking or food preparation, seek professional advice about testing and an appropriate, ongoing treatment system.
Water testing and treatment
The right treatment depends on your water source, test results and intended use. Treatment options may include chlorination, ultraviolet (UV) disinfection and filtration.
Different systems address different contaminants. Seek advice from a qualified water treatment provider and follow the manufacturer’s maintenance instructions.
The Department of Health’s Standard Drinking Water Test information explains testing options and lists participating laboratories.
View drinking water testing information